Wind-flow emitting boundaries

If inflow boundary conditions are applied, the inflow velocity [m/s] and density [kg/m$^3$] has to be defined here. If you want to start with the constant velocity and direction over the whole computational domain you have to set the last parameter in this section to [1] for "everywhere". If you want only inflow from boundaries and no velocity in the computational domain at the beginning you have to set this parameter to [0].

#if inflow boundaries the inflow velocities and density
#inflow velocity [m/s], inflow density [kg/m^3]
#and inflow temperature [K] and starting everywhere[1] or only from boundaries [0].
100
1.229
300
1